Pathfinder EMIT-pH

Pathfinder EMIT-pH
Click to enlarge
Price: $329.00
Product ID : EMIT-pH
Manufacturer: Pathfinder Instruments
E-mail to a friend

Purchase

Description

Pathfinder Instruments Model EMIT-pH miniature pH transmitter

The Model EMIT-PH (encapsulated miniature isolated transmitter) is a 2-wire, 4-20 mA pH transmitter featuring input to output isolation, high performance and small size.
The transmitter accepts as its input any pH electrode via a BNC coaxial connector. It transforms the probe signal to a 4 to 20mA current proportional to the pH level. This output may be transmitted over two wires to a control location; the same 2 wires provide power to the transmitter. Any D.C. power supply from 12 to 36V may be used. There are two adjustments on the transmitter to standardize probes for “Slope” and “Cal”. The output can be monitored with a loop powered meter, a loop resistor or a multimeter during the standardization procedure.
Temperature compensation is automatic with use of a platinum resistance temperature probe with an alpha of .00375ohms/ ohms/^C and 1000ohms at 0^C. Manual temperature compensation is achieved with use of a fixed resistor on the transmitter terminal strip.
pdf-icon.png PFI-EMIT-pH Data Sheet16.pdf

Product Reviews

Login or Register to write the first review.

Products You May Like

Pathfinder PHTM-1
Non- Isolated, 0 to 14pH encapsulated two-wireÿ(loop powered)ÿ4 to 20 mA pH...
$329.00
Pathfinder pH41HP-CA-SUB
A New and Innovative pH Transmitter for process water measurement of In-line...
$499.00
Pathfinder EMIT-ORP
a 2-wire, 4-20 mA pH transmitter featuring input to output isolation, high...
$329.00
Pathfinder pH41-HP-FMH
A New and Innovative pH Transmitter for process water measurement of in-line,...
$302.00
Pathfinder pH41HP-CA-IN
A New and Innovative pH Transmitter for process water measurement of In-line,...
$499.00
Pathfinder ORPT-1 Non-Isolated transmitter
non isolated, 1000mv to +1000mv encapsulate 2 wire 4-20mA Miniature ORP...
$252.00