Blancet B16C-Floclean Turbine Meter

Blancet B16C-Floclean Turbine Meter
Click to enlarge

More images

Click to enlarge
Price: Call for price
Product ID : B16C
Manufacturer: Blancett
Weight: 5.00 lbs
E-mail to a friend

Purchase

Call for price

Description

Blancett FloClean Turbine Flow Meter

3-A sanitary turbine flow meter for 0.6 to 400 gpm flow rates


Features

  • 316L Stainless Steel
  • 3-A Sanitary Standard number 28-03
  • Accuracy of ±1.0% of Reading
  • ±0.1% repeatability
  • 0.6 to 400 gpm
  • For COP/SOP environments
  • Materials comply to FDA requirements
  • 5-Point Calibration (call us for 10- or 20-point)
  • Sanitary clamp end connection
  • -150 to +300°F turbine temperature
Description

The 3-A sanitary Blancett FloClean turbine flow meter was developed for use in the food, beverage, and pharmaceutical industries. The 316L stainless steel construction of the Blancett FloClean turbine flow meter provides a durable and cost efficient flow measurement system that offers excellent accuracy and repeatability.

The sanitary Blancett FloClean turbine flow meter utilizes the most up-to-date polishing technology on all internal components, and all materials comply with FDA requirements. The Blancett FloClean turbine flow meter meets the requirements of 3-A Sanitary Standard number 28-03 for use in clean-out-of-place (COP) and sanitize-out-of-place (SOP) applications.

The Blancett FloClean turbine flow meter's output signal is a sine-wave that is proportional to volumetric flow. With optional Blancett electronics, the Blancett FloClean turbine flow meter provides local flow rate and volume totalization and will interface with most displays, PLCs, and computers.

Blancett FloClean Turbine Flow Meter Repair Kits

Factory calibrated replacement kits are available for field or factory service. Both of the Blancett FloClean turbine flow meter models are designed to allow for quick, easy disassembly, and replacement of internal components.

A clean-out-of-place (COP) and sanitize-out-of-place (SOP) repair kit contains two retaining rings, two rotor supports, one rotor assembly, and a K-factor tag. Contact us for further information regarding repair kits.

Specifications of the Blancett FloClean Turbine Flow Meter
Materials of Construction
Body and Internal Wetted Parts: 316L Stainless Steel
Bearings: Standard – Nickel Bindery Tungsten Carbide
Turbine: Nickel Plated CD4MCU Stainless Steel
Shaft: Nickel Bindery Tungsten Carbide
Sanitary Seals: Teflon® (CIP/SIP only)
Calibration
Water (NIST Traceable Calibration)
Pressure Rating
1,000 psi (Rating based on Tri-clamp sanitary connection)
Mag Pick-up
NEMA 6; -150 to +300°F (-100 to +149°C)
Operating Principle

Fluid entering the meter first passes through an inlet flow straightener that reduces its turbulent flow pattern. Fluid then passes through the turbine, causing the turbine to rotate at a speed proportional to fluid velocity. As each turbine blade passes through the magnetic field generated by the meter's magnetic pick-up, an AC voltage pulse is generated. These pulses provide an output frequency that is proportional to volumetric flow.

Blancett-FloClean-datasheet.pdf
Blancett-FloClean-manual.pdf

Product Reviews

Login or Register to write the first review.

Products You May Like

GF Signet 2100-1H Turbine Flow Sensor
Turbine flow sensor for small diameter applications, .1 to 1 GPM
$287.00
Blancett B142-20
Highly accurate inline turbine flow meter for gases
Call for price
Blancet 1100 Turbine Meter
Inline turbine flow meters for corrosive and abrasive fluid measurement, flow...
Call for price
Blancett B3000 Monitor
A flexible, durable, easy to use platform for flow metering applications
Call for price
GF Signet 2100L Turbine Flow Sensor
Turbine flow sensor for small diameter applications, .1 to 1 GPM
$287.00
Blancett B2800 Monitor
Flow monitor for Blancett turbine flow meters
Call for price