$495.00
Jenco 6219 Benchtop Meter
•Two LCD display pH, mV, direct ion concentration and temperature.
•Convenient calibration with automatic buffer recognition of US or European pH buffer sets. Quick two points ion calibration. Calibration data is stored in memory and is ready for use on power up.
•User selectable resolution of up to 0.001 for greatest accuracy.
•Direct read out in ion concentration to simplify ion measurements.
•RS-232 computer interface with software.
•AC adaptor or battery power (low battery indicator).
Description
Jenco 6219 Benchtop Meter
•Two LCD display pH, mV, direct ion concentration and temperature.
•Convenient calibration with automatic buffer recognition of US or European pH buffer sets. Quick two points ion calibration. Calibration data is stored in memory and is ready for use on power up.
•User selectable resolution of up to 0.001 for greatest accuracy.
•Direct read out in ion concentration to simplify ion measurements.
•RS-232 computer interface with software.
•AC adaptor or battery power (low battery indicator).
Specifications
Range Resolution Accuracy
pH -2.000 to 16.000 pH 0.01pH/0.001pH ± 0.01 %±1 digit
ORP -1999.9 to 1999.9mV 1 mV/0.1mV ± 0.01 %±1 digit
lon 0.0 to 119.8conc 0.05,0.1 or 0.2conc ±2 digit
Temp -5.0 to 125.0 °C 0.1 °C ± 0.5 °C
General
•pH buffer recognition: US(4.01,7.00,10.01) or NIST(4.00,6.86,9.18) factory set
•pH Electrode Offset Recognition: ± 90mV at pH 7.00 or 6.86
•pH Electrode slope recognition: ±30% at pH 4.00 , 4.01, 9.18 or 10.01
•pH Temp Compensaton: Auto /manual -5.0 to 125.0 °C
•Input impedance : >10(exp)13 ohms
•Output / Connector : RS232 /BNC and 8 PIN
•Power :6 x 1.5 Volt AA batteries or 115 / 230V AC adapter
•Operating Temperature Conditions: From 0 to 50°C , at 85% RH
•Weight/Dimensions: 1070 grams(Including batteries) / 250mm x 240mm x 100mm
Need Help or a Custom Design? Contact Us
Additional information
Weight | 2 lbs |
---|