Jenco 6308CT-Conductivity Analyzer

Call for quote

$529.00

Jenco 6308CT-Conductivity Analyzer

Conductivity analyzer, 1/4 DIN panel mount single parameter analyzer with an IP-65 case, and selectable 2 or 4- wire cells. Has programmable reference temperature and coefficients. The 4-20 mA output is fully programmable, reversible and isolated. There are 2 programmable relays for conductivity and one relay for temperature and an RS-485 interface. Password & ID protected. Graphical display. CE approved. 115/230V AC.
SKU: 81 Categories: ,

Description

Jenco 6308CT-Conductivity Analyzer

Conductivity analyzer, 1/4 DIN panel mount single parameter analyzer with an IP-65 case, and selectable 2 or 4- wire cells. Has programmable reference temperature and coefficients. The 4-20 mA output is fully programmable, reversible and isolated. There are 2 programmable relays for conductivity and one relay for temperature and an RS-485 interface. Password & ID protected. Graphical display. CE approved. 115/230V AC.
  • Bumpless calibration
  • CE approved
  • RS-485 output
  • Programmable relays for conductivity
  • Reversible and isolated 4 to 20ma output
  • Programmable relay for temperature
  • Conductivity/temperature measurement & control
  • Simultaneous analysis and display for measurement and controls
  • User programmable reference temperature temperature coefficient
  • Selectable 2-wire or 4-wire cells for long cable length & wide measurement range

Specifications

  • Range Resolution Accuracy
    Cond. 0 uS to 5.0 mS 0.01 uS to 0.1 mS 0.5% ± 1 LSD
    TDS 0 ppm to 150.0 ppt 0.01 ppm to 0.1 ppt 0.5 % ± 1 LSD
    Temp. -10.0 to 120°C 0.1 °C ± 0.1 °C
  • Conductivity

    • Reference temperature: 1.5 °C to 25.0 °C
    • Temperature coefficient: 0.0 % to 40.0%
    • Basic cell constant: 0.01,1 and 10.0
    • Cell constant range: ±30% of basic cell constant

    Output Relays

    • Output relays numbers: Two programmable high or low relays for conductivity
    • Control type: On/off
    • Relay output (resistive load only): 5amps at 115 VAC, 2.5 amps at 230 VAC
    • Relay set point hysteresis: User programmable

    Current Output

    • Current output: Isolated 4 to 20 mA
    • Range: Selectable zero, & span
    • Accuracy: ±0.02mA
    • Isolated voltage: 500 VDC
    • Maximum load: 500 ohms

    General

    • ATC sensor: Thermistor 10kiloohms at 25 °C
    • Security protection: 4digit password
    • Keypad: Audio feedback
    • Communication: RS-485
    • Display: Graphic LCD w/backlight
    • Power source: 115/230 VAC, 50/60hz
    • Dimensions: 1/4 DIN, depth 148 mm
    • Weight: 950 gm

    Need Help or a Custom Design? Contact Us

Additional information

Weight 3 lbs

Pathfinder Instruments

21955 Plummer Street
Chatsworth, CA 91311

Hours of Operation

9:00 AM – 5:00 PM PST