Pathfinder CT-1000-100PPM-K0.1 Conductivity Transmitter

$269.00

Pathfinder CT-1000-100PPM-K0.1 Conductivity Transmitter

The CT-1000-100PPM-K0.1 measures conductivity in the range of 0-100ppm. It is intended for use with 3-wire temperature-compensated sensors or 2-wire conductivity only sensors. The Model CT-1000 miniature transmitter is a 2-wire, 4-20 mA / 1-5 VDC conductivity transmitter featuring epoxy encapsulated construction, high performance, RoHs compliance and small physical size.

Available on backorder

Description

Pathfinder CT-1000-100PPM-K0.1 Conductivity Transmitter

The CT-1000 is intended for use with 3-wire temperature-compensated sensors or 2-wire conductivity only sensors. The Model CT-1000 miniature transmitter is a 2-wire, 4-20 mA / 1-5 VDC conductivity transmitter featuring epoxy encapsulated construction, high performance, RoHs compliance and small physical size.

This transmitter converts the Conductivity cell signal to a usable 4ma to 20mA current (1-5 VDC using a load resistor) signal proportional to the conductivity level. Any DC power supply from 12 to 36V may be used. There are two adjustments “ZERO” and “SPAN” that are used for calibration. The output can be monitored or used as a process variable with a loop powered meter, recorder or PLC.

Supported Probes:

CS-100

CT-1000 Manual

Need Help or a Custom Design? Contact Us

Additional information

Weight .1835 lbs

Pathfinder Instruments

21955 Plummer Street
Chatsworth, CA 91311

Hours of Operation

9:00 AM – 5:00 PM PST