Pathfinder CT-1000PT-10US-K0.1

$269.00

Pathfinder CT-1000PT-10US-K0.1

Our most popular model! The CT-1000PT-10US-K0.1 measures conductivity in the lowest range — 0 to 10 microsiemens.

The CT-1000PT is intended for use with 4-wire, temperature-compensated conductivity sensors. The Model CT-1000PT miniature transmitter is a 2-wire, 4-20 mA (1-5VDC) conductivity transmitter featuring epoxy encapsulated construction, high performance, RoHs compliance and small physical size.

Longer cables up to 60’ are available in 10’ increments.  Specific custom lengths are also available with a tolerance of =/- 1” with a minimum quantity requirement.

Description

Pathfinder CT-1000PT-10US-K0.1

The CT-1000PT is intended for use with 4-wire, temperature-compensated conductivity sensors. The Model CT-1000PT miniature transmitter is a 2-wire, 4-20 mA (1-5VDC) conductivity transmitter featuring epoxy encapsulated construction, high performance, RoHs compliance and small physical size.

This transmitter converts the Conductivity cell signal to a usable 4mA to 20mA current (1-5 VDC using a load resistor) signal proportional to the conductivity level. Any DC power supply from 12 to 36V may be used. There are two adjustments “ZERO” and “SPAN” that are used for calibration. The output can be monitored or used as a process variable with a loop powered meter, recorder or PLC.

Longer cables up to 60’ are available in 10’ increments.  Specific custom lengths are also available with a tolerance of =/- 1” with a minimum quantity requirement.

Supported Probes:

Sensorex CS675HTTC-K=0.1/P1K

Sensorex CS675HTTC-K=1/P1K

Sensorex CS650-K=0.1

Sensorex CS650-K=1

Sensorex CS676HTTC-K=0.1

Sensorex CS676HTTC-K=1

pdf-icon.png CT-1000PT Manual

Need Help or a Custom Design? Contact Us

Additional information

Weight .1885 lbs

Pathfinder Instruments

21955 Plummer Street
Chatsworth, CA 91311

Hours of Operation

9:00 AM – 5:00 PM PST