Reduce the Need for Boiler Shutdowns.

Boiler Conductivity Sensors can measure directly in the blow-down line without sample cooling — saving on installation & ongoing operating costs. It enables continuous automatic blow-down control in a boiler, which minimizes corrosion and scaling to a greater extent than with manual measurement and control. 

Boiler Conductivity Sensors 316 SS Construction


Sensorex boiler conductivity sensors use 3/4" male NPT threads. Both the body and the measuring pin are constructed of 316 stainless steel. They feature a special thermally resistant PEEK insert and high temperature "O" rings. Two models are available and each model may be ordered with or without ATC elements depending upon your application requirements. 

The CS675HT and CS675HTTC  feature a 1" insertion depth beyond the 3/4" MNPT threads. The models CS676HT and CS675HTTC provide 3" insertion depth past the 3/4" MNPT threads. All boiler probes are supplied with 6" PTFE coated leads for Junction Box connection and extension. Cell K value of 1.0 is standard. Longer cable lengths can be supplied at additional cost.

CS675HTBoiler Probe - High Temperature

CS675HTTCBoiler Probe - High Temp + ATC

CS676HT-Boiler Probe - High Temp (Longer)

CS676HTTCBoiler Probe - HT with ATC (Longer)

The reduced need for boiler shutdown, cleaning and repairs can pay for itself in a short period of time. At the same time, continuous measurement and control conserves energy and treatment chemicals by eliminating excessive blowdown going to waste. 

Contact for more information about Senorex products.